Room Side Replaceable Filter Unit
Normal
This type of filter is mainly used in Class 1,000 to 100,000 C/R which can replaces the traditional HEPA BOX type filter. It’s easy to replace and more economical than Box Type, which makes it a desirable choice for construction engineers.
Filter Unit Compare Table
Construction Cost | Maintenance Cost | Convenient of Replacement | Practictability | |
Room Side Replaceable Filter Unit | O | ◎ | ◎ | ◎ |
Disposable Filter Unit | ◎ | X | X | △ |
Conservative Filter Unit | X | △ | △ | △ |
Economical and Cost-Efficiency:
Easy replaceable filter unit can reduce the cost and it is more efficient.
Easy and Convenient to Replace:
Clip-on filter fixture. Filter can be replaced from roomside. Quick installation and convenient to replacement.
Widely Multi-Functional Design:
Fit for all kinds of ceiling grid, heavy duty T-bar, light duty T-bar,and ceiling panel.
Sturdy and Lightweight Housing:
Made by anodized aluminum, light in weight Easy to handle and install.
Friendly and custom-built:
There are various of inlet ducts and stainless outlet panel to choose, which satisfied all needs.
Professional and Quality Filter:
Collect specifically with "KOWA" replaceable air filter. Quality is guaranteed.
Filter Three-View
HEPA
D.O.P. | P.S.L. | Testing |
99.99% 99.97% |
at | 0.3µm |
---|
Operating Conditions
- Apply Temperature: 80°C
- Apply Humidity: 100%RH (No Dew)
Qualified With
- Std. EN 1822 Class H11 / H12 / H13 / H14
- Std. ENS RP-CC-001.3 TYPE A / B / C / D
With Standard Capacity ULPA Filter:
Filter Unit Model | Dimension | Filter Model | Dimension | Capacity | Initial P.D. |
(*without inlet duct) Length * Width * Depth |
(*without gasket) Length * Width * Depth |
||||
FB-C10600250 | 1210×600×180 mm | H4MHB70560070 | 1170×560×70 mm | 34.3 CMM |
25.4 mmH2O (249 Pa) |
FB-B70570250 | 1170×570×180 mm | H4MHB30530070 | 1130×530×70 mm | 31.2 CMM | |
FB-905600250 | 905×600×180 mm | H4MH865560070 | 865×560×70 mm | 25.1 CMM | |
FB-870570250 | 870×570×180 mm | H4MH830530070 | 830×530×70 mm | 22.7 CMM | |
FB-600600250 | 600×600×180 mm | H4MH560560070 | 560×560×70 mm | 15.9 CMM | |
FB-570570250 | 570×570×180 mm | H4MH530530070 | 530×530×70 mm | 14.2 CMM |
With High Capacity ULPA Filter:
Filter Unit Model | Dimension | Filter Model | Dimension | Capacity | Initial P.D. |
(*without inlet duct) Length * Width * Depth |
(*without gasket) Length * Width * Depth |
||||
FB-C10600250 | 1210×600×180 mm | H4MHB70560070 | 1170×560×70 mm | 50.4 CMM |
25.4 mmH2O (249 Pa) |
FB-B70570250 | 1170×570×180 mm | H4MHB30530070 | 1130×530×70 mm | 45.9 CMM | |
FB-905600250 | 905×600×180 mm | H4MH865560070 | 865×560×70 mm | 36.9 CMM | |
FB-870570250 | 870×570×180 mm | H4MH830530070 | 830×530×70 mm | 33.4 CMM | |
FB-600600250 | 600×600×180 mm | H4MH560560070 | 560×560×70 mm | 23.4 CMM | |
FB-570570250 | 570×570×180 mm | H4MH530530070 | 530×530×70 mm | 20.9 CMM |
*Standard diameter of inlet duct are 14"Φ(350mm),12"Φ(300mm) and 10"Φ(250mm)
Structural Drawing
ULPA
D.O.P. | P.S.L. | Testing |
99.9995% 99.99995% |
at |
0.1µm 0.2µm |
---|
Operating Conditions
- Apply Temperature: 80°C
- Apply Humidity: 100%RH (No Dew)
Qualified With
- Std. EN 1822 Class U15 / U16 / U17
- Std. ENS RP-CC-001.3 TYPE F
With Standard Capacity ULPA Filter:
Filter Unit Model | Dimension | Filter Model | Dimension | Capacity | Initial P.D. |
(*without inlet duct) Length * Width * Depth |
(*without gasket) Length * Width * Depth |
||||
FB-C10600250 | 1210×600×180 mm | U5MHB70560070 | 1170×560×70 mm | 20.2 CMM |
17 mmH2O (167 Pa) |
FB-B70570250 | 1170×570×180 mm | U5MHB30530070 | 1130×530×70 mm | 18.3 CMM | |
FB-905600250 | 905×600×180 mm | U5MH865560070 | 865×560×70 mm | 14.8 CMM | |
FB-870570250 | 870×570×180 mm | U5MH830530070 | 830×530×70 mm | 13.3 CMM | |
FB-600600250 | 600×600×180 mm | U5MH560560070 | 560×560×70 mm | 9.4 CMM | |
FB-570570250 | 570×570×180 mm | U5MH530530070 | 530×530×70 mm | 8.3 CMM |
With High Capacity ULPA Filter:
Filter Unit Model | Dimension | Filter Model | Dimension | Capacity | Initial P.D. |
(*without inlet duct) Length * Width * Depth |
(*without gasket) Length * Width * Depth |
||||
FB-C10600250 | 1210×600×180 mm | U5MHB70560070 | 1170×560×70 mm | 34.3 CMM |
25.4 mmH2O (249 Pa) |
FB-B70570250 | 1170×570×180 mm | U5MHB30530070 | 1130×530×70 mm | 31.2 CMM | |
FB-905600250 | 905×600×180 mm | U5MH865560070 | 865×560×70 mm | 25.1 CMM | |
FB-870570250 | 870×570×180 mm | U5MH830530070 | 830×530×70 mm | 22.7 CMM | |
FB-600600250 | 600×600×180 mm | U5MH560560070 | 560×560×70 mm | 15.9 CMM | |
FB-570570250 | 570×570×180 mm | U5MH530530070 | 530×530×70 mm | 14.2 CMM |
*Standard diameter of inlet duct are 14"Φ(350mm),12"Φ(300mm) and 10"Φ(250mm)
Structural Drawing